M2000 Replacement Water Filters

$69.95$239.95

  • Please check the model number of your current filter before ordering.
  • This filter replaces model number XO1170 or the M1000 water filters
  • If you need Model 5515 or L10HMLC, you can order here.
  • Replacement of the cartridges is completed in less than a minute.
  • Receive a discount for 2 or more.
  • Free Shipping in the 48 Continental USA (Sorry, Hawaii and Alaska…)
Clear
SKU: M2000 Category: Tag:

Description

The 1-Minute Filter Change

The M2000 Twist-Off Water Filter that comes with your ClearPoint Water "BottleLess" Water Coolers is about as "user-friendly" as you can imagine.

To change the filter, just turn off the water with the included shut off valve (it's blue - so you can't miss it), remove the front door of the access panel, untwist the existing filter and twist on the new filter. Then, turn the water back on - and enjoy!

Easier than changing a printer cartridge!

Image
Image

The M2000

Businesses with less than 10 people - and homes - can usually get by changing the filter cartridge once a year. Medium-sized offices (more than 10 people) and water coolers that get lots of use will want to change the water filter cartridges 2x per year. (We’ll send you an email reminder.)

This purification system is independently certified to remove the things most people are concerned about in their tap water: chlorine and other harmful chemicals, lead, bad taste and odor. However, this commercial-grade purification system leaves the beneficial minerals in your purified water.

The Deets

Our micron purification system has been tested to NSF performance Standard 42 and Standard 53. It is independently certified for chlorine, lead, cysts, bad taste and odor reduction. Specifically, it is a 1 micron, block, granular activated carbon filter with lead reduction media. It is certified for 1,200 gallons which equates to drinking 240 of those big five-gallon bottles.

These filters undergo rigorous testing and independent verification for performance. Each filter is rated at .5 gpm with a maximum pressure of 125 psi and a maximum temperature of 100º F. Class 1 filtration media. All filters should be installed on cold water lines only.

NOTE: Activated carbon filters are not intended to be used where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection.

Image